Transletter

Certified Transmission - Transletter ®

June 01, 2011

Verify the Systems Before Condemning the Transmission

Written by Randy Peterson - Diagnostician
A few months ago a customer brought in a 2003 Dodge 1500 Pickup with a 5.7 Hemi and 545RFE transmission. The check Engine lamp was on and the truck would not accelerate from a stop unless you put the transmission in second gear. I started the preliminary check procedure by checking the fluid. It was full, not in great shape but no burnt odor. Next, I scanned for diagnostic trouble codes. The ECM stored a couple EVAP codes and the TCM had a P2706 – MS (multi-select) Solenoid Circuit. Oddly enough it did not have a P0700 (Trans Control System Malfunction) stored in the ECM. This vehicle utilizes an ECM and separate TCM. After a short road test the customer’s concerns were confirmed. I cleared the DTC and road tested it again to see if the code reset and it did. Further diagnostics were required. The vehicle owner authorized the diagnostics, and we began the process.